|
Who's Online
There currently are 5824 guests and 2 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
;
Very good manual, at a very good price. Received in a timely manner
;
Only thу cover has poor quality, internal material has excellent quality - exactly what I needed
Thanks!
;
Had everything I needed. Onyly took a few hours after paid for by PayPal. The copy was very readable.
;
Hi
First, thank you very much for the fast delivery.
I'm really satisfied with your manual. I could find everything, I needed.
I appreciate your service.
Regards from Germany PB
TK-2180
DISASSEMBLY FOR REPAIR
2. How to Stick the Sheet (G11-4326-04)
1) Remove the white separation paper of the sheet first (q) and stick the sheet on the front-glass (w). Next, remove the transparent separation paper of the sheet (e).
Sheet (G11-4326-04) e
4. How to Attach the VGS-1
1) Remove the 2 screws. 2) The tip of tweezers is put into the screw hole of the cover and is pried, the cover will remove. 3) Use the 2 rubber cushions and attach them to the VGS-1. 4) Plug the VGS-1 into the VGS-1 connector of the PC board, pressing down on the top of the VGS-1 until secure. 5) The spacer turns the adhesive surface down. Next, push between the chassis and VGS-1. 6) Replace the cover and tighten the 2 screws.
q
Front-glass w
3. How to Attach the TX-RX Unit
1) In order to attach the TX-RX unit in chassis, don�t put in the TX-RX unit aslant. Please level the chassis and the TX-RX unit and attach them.
Rubber cushion (G13-1995-04) 20 x 30 x 1.0 mm
VGS-1
Rubber cushion (G13-1974-04) 21 x 21 x 2.5 mm
VGS-1 VGS-1 connector Spacer (J30-1292-04) 4.5 x 24 x 3.0 mm
6
|
|
|
> |
|