Quick site processing. A complete and very useful manual with all details. Thank you!
Text excerpt from page 4 (click to view)
DISASSEMBLY FOR REPAIR
How to attach the tray and the clamper.
1. Turn the traverse gear A in the direction of the arrow in the drawing so that the traverse unit will reach the highest position.
Assembling and Disassembling the Optical Pickup
The optical pickup can be damaged by static electricity from your body. Be sure to take static electricity countermeasures when working around the optical pickup. Handling the Optical Pickup 1. The optical pickup is an extremely high-precision mechanism. Do not subject it to strong damage. 2. Testers cannot be used to check the laser diode of the optical pickup. The power supply in side the tester can easily damage the laser diode. 3. Take care when handling the flexible cable because excessive force can cause it to break. 4. To preserve the quality of the optical pickup replacement parts during transport and installation, the terminals of the laser diode are short-circuited. After replacing the parts, use the proper procedure to return the laser diode to its original condition. Static Electricity Countermeasures The laser diode inside the traverse unit (optical pickup ) can be damaged by static electricity from your body. Be sure to take static electricity countermeasures when working around the optical pickup. Static Electricity Countermeasure Methods 1. Ground yourself Use an anti-static wrist strap to discharge static electricity from your body. 2. Ground the workbench Lay a conductive material (sheet) or steel sheet on the surface where the traverse unit (optical pickup)is to be placed, then ground the sheet. Assembling the Optical Pickup 1. Insert a flexible cable in the arrow direction in the drawing. 2. Cut the flexible cable.
TRAVERSE GEAR A
2. Attach the tray in the arrow direction.
3. Attach the clamper in the arrow direction.