|
Who's Online
There currently are 6033 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This is a very well written and comprehensive manual. It answered all our queries.
;
Excellent copy that was delivered within 12 hours and solved my problem.
;
I did not have the manual for a Whirl Pool gas dryer, therefore I purchased it from Owner-manuals. This is exactly what I needed. Thank you for the service.
;
I was so pleased to get the owner`s manuel within one hour! Thanks again.
Regards
Werner
;
Finding the owners manual for my Pioneer CRWM62R is greatly appreciated. I had searched several other web sites with no success. Although my manual was not listed on your site for immediate download, I recevied an email within a few hours that my ower's manual was posted for me. I had no difficulty downloading the manual for my 20 year old multi-cassette player. Owner Manuals provides a service that is valuable, easy-to-use, accurate , efficient, and priced fairly. I thank you.
Preparing for surround sound
KR-V888D (En/T)
4 Adjust the volume levels of each speaker.
Listen to the test tone and adjust the volume level of each speaker so that they all produce the test tone at the same volume level.
17
1 Select the test tone type.
SET UP
SP.SLCT SP.LVL SP.DIST MAIN IN LVL
3
AUTO : The test tone switches between each speaker in regular intervals. MANUAL : The test tone only comes from the selected speaker (displayed in blue). OFF : Stops the test tone.
SPEAKER LEVEL
TEST TONE
2 Adjust the Volume level of each speaker.
1 Listen to the test tone and select the speaker you want to adjust.
� The selected speaker icon turns blue and the speaker name and level appear (at the bottom of the screen) to show that it can be adjusted.
L
=
0dB
AUTO MANUAL OFF
1 2
2 Listen to the test tone and adjust the volume level of the speaker (± 10 dB) using the TUNING/SKIP keys on the remote control. TUNING/SKIP � : Lowers the volume TUNING/SKIP + : Raises the volume
� Adjust the subwoofer as you desire.
3 Continue to the SP.DIST (speaker distance) screen.
5 Enter the speaker distance.
Enter the distance from your listening position to the front (left or right), center, and rear (left or right) speakers. If both front (or rear) speakers are not the same distance from the listening position, enter the distance to the closest speaker.
SET UP
SP.SLCT SP.LVL SP.DIST MAIN IN LVL
1 Select the speaker.
The speaker name turns blue. An arrow icon appears to indicate the selected speaker.
3
SPEAKER DISTANCE
FRONT CENTER SURR. 10ft 3. 0m
2 Enter the speaker distance.
steps.
Use TUNING/SKIP on the remote control to select the appropriate distance. The distance is adjustable from 0.0meters (0 feet) to 9.0meters (30 feet) in 0.3meter (1 foot)
1
3 Continue to the IN LVL (input level) screen.
6 Adjust the audio input level of the connected components.
The LEVEL INDICATOR lights during playback if the signal being input from an analog source is too large. If this occurs, use this screen to attenuate the input level for that source.
SET UP
SP.SLCT SP.LVL SP.DIST MAIN IN LVL
1 Select the input.
1 Use TUNING/SKIP on the remote control to select the desired input. 2 Move the pointer downward.
INPUT LEVEL SELECTOR: LEVEL
TUNER
2 Select an input level.
1 2
: 0dB
The input level is adjustable in 3 levels. Use TUNING/SKIP on the remote control to select the smallest level required to extinguish the LEVEL INDICATOR (normally, set to 0 dB). 0 dB � �3 dB � �6 dB � Input level adjustment is not possible when using the AUX.6CH INPUT or ADAPTOR jacks.
3 Press the SETUP key on the remote to turn off the on-screen display. 4 Press either VIDEO, AUDIO, or TV key on the remote to cancel the OSD remote control mode.
This completes the surround setup.
Preparations
|
|
|
> |
|