The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
Text excerpt from page 8 (click to view)
KRF-V5050D/V5550D/V6050D/V7050D/X9050D
CIRCUIT DESCRIPTION
4. AK4112AVF u-com interface port
Pin Name Pin No. PD 7 AUTO 5 FS96 17 ERF 18 CSN 25 CCLK 26 CDTI 27 CDTO 28 I/O I O O O I I I O Function Power Down Mode Pin When "L", the AK4112AVF is power down and reset. Non PCM Detect Pin "L":No detect, "H":Detect 96kHz Sampling Detect Pin "H":fs=88.2kHz or more, "L":fs=54kHz or less. Unlock & Parity Error Output Pin "L":No Error, "H":Error Chip Select pin in Serial Mode Control Data Clock Pin in Serial Mode Control Data Input Pin in Serial Mode Control Data Output Pin in Serial
5. AK4527B u-com interface port
Pin Name Pin No. PDN 17 OVF 33 CSN 41 CCLK 42 CDTI 43 I/O I O I I I Function Power Down & Reset Pin Analog Overflow Detect Pin Chip Select Pin Control Data Clock Pin Control Data Input Pin
6. Test Mode
6-1 Entering the Test Mode
� While pressing the "BAND" key, plug the power cord into AC wall outlet.
6-2 Cancelling the Test Mode
� Initialized and cancel the test mode if pulling out the power code.
6-3 Contents of the Test Mode 6-3-1 Pch CALL UP/DOWN
Key DIMMER Function Pch CALL UP ... 01 02 03 Pch CALL DOWN ... 01 02 03
... ...
39 40
INPUT MODE
39 40
6-3-2 10 Steps Switching of P ch Call
Key SET UP Function Preset Operation
6-3-4 Key Operation
� The following operation is available during the all FL lighting up mode only.(only VR-507/509/510) Operation Keys Display Function SOUND Normal Indication RF receiving frequency is made 422MHz for VR-509/510 and 418MHz for VR-507. LISTEN MODE FRONT IR FRONT IR is enabled and remote control is disabled. SOURCE DIRECT RF BAND 2 RF receiving frequency is made 428MHz for VR-509/510.