This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
Das Service Manual war von der ersten bis zur letzten Seite sehr informativ und hilfreich. Die Darstellung aller Teile war klar und der Text gut lesbar.
Vielen Dank, das war nicht der letzte Download bei ownner-manuals.com.
Text excerpt from page 6 (click to view)
KRC-788
ADJUSTMENT
No ITEM
INPUT SETTINGS
OUTPUT SETTINGS
TUNER (RECEIVER) SETTINGS
ALIGNMENT POINTS
ALIGN FOR
FIG.
CASSETTE DECK SECTION [1] AZIMUTH
TCC-153 10kHz
Connect a AC voltmeter to SP OUT Connect a AC voltmeter to CN200
Head Azimuth TAPE PLAY Screw VR200A (L) VR200B (R)
Adjust the azimuth for each Lch/Rch or FWD/RVS becomes maximum 300mV (a)
[2]
PLAY BACK LEVEL
TCC-130
TAPE PLAY
F/E CASSETTE MECHANISM VR200B VR200A Rch Lch R G L AC voltmeter (a) 300mV
CN200
ATTENTION OF ASSEMBLY
Assembly of FPC(Flexible PC board) onto Roller ass'y Turn Roller ass'y by 4 times. Hook the end of Roller ass'y to the tongue. Insert the FPC into the slit of Roller ass'y then release the end of Roller ass'y and the tongue.