KENWOOD KRC-269S
Owner's Manual

Station Preset Memory
Putting the station in the memory.

2

Call up the station Press the [#1] � [#6] button.

1 2 3

Select the band Press the [FM] or [AM] button. Select the frequency to put in the memory Press the [4] or [¢] button. Put the frequency in the memory Press the [#1] � [#6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [#1] � [#6] button.

CRSC (Clean Reception System Circuit)
Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. Press the [CRSC] button for at least 1 second. Each time the button is pressed CRSC turns ON or OFF. When it's ON, the " "(CRSC) indicator is ON.

Auto Memory Entry
Putting stations with good reception in the memory automatically.

Frequency Step Setting
Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz.

1 2

Select the band for Auto Memory Entry Press the [FM] or [AM] button. Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.

1 2

Turn the power OFF Press the [SRC] button for at least 1 second. Switch the frequency step While pressing the [#1] and [#5] button, press the [SRC] button. The frequency step changes to FM band 200 kHz, and AM band 10 kHz.
� When the same operation is repeated, it returns to the original setting. � When the frequency step is switched, the frequencies in the memory are deleted.

Preset Tuning
Calling up the stations in the memory.

1

Select the band Press the [FM] or [AM] button. �9�