I Recently purchased yet another Service Manual from Owner-Manuals.com, this time for a Sony EVS700ES/UB Videocassette Recorder. The Manual was available for upload within two hours and is an Extremely Good copy, as some of this I was able to enlarge to get even better detail.
Once Again, Very happy with the result!
A good and useful manual. With these, We was abled to isolate and pin point the component that was causing the problem. The total time spent in troubleshooting is very much reduced.
Very good service for get any documentation. Fast and perfect quality.
Text excerpt from page 2 (click to view)
KDS-100
OPERATING FEATURES / INSTALLATION
Front panel
1 2
TK-780/880/980/981 Series (TK-*80 Series)
s Installing the KCT-34 in the Transceiver
1. 2. 3. 4.
6 7
Remove the upper cover from the transceiver. Lift the DC cord bushing ( 1 ) from the chassis. Remove the pad as shown in the Figure 1 ( 2 ). Insert the KCT-34 cable ( 3 ) into the chassis ( 4 ). The wire harness band ( 5 ) must be inside the chassis. 5. Replace the DC cord bushing ( 6 ). 6. Connect the KCT-34 to the TX-RX unit (A/2) as shown in Figure 2 ( 7 ).
Connector Wire Color Brown NC NC Orange Gray NC Yellow Blue Pin No. Connector 4 � � 5 10 � 6 8 B-1 B-2 B-3 C-1 C-2 C-3 D-1 D-2 D-3 Wire Color NC White Green Purple Light blue Light green NC Black Red Pin No. � 11 7 9 14 15 � 3 1
3
4
5
A-1 A-2 A-3 A-4 A-5 A-6 A-7 A-8
1
Display
Messages appear on this 240 x 64 dot LCD.
2
LED Indicator (default settings)
Lights red while �talking� to the mobile unit. Lights green while �listening� to the mobile unit. Flashes orange when a message is waiting.
3
MENU key
Press to enter the Menu mode, in order to select your desired menu.
4
Keys 1 ~ 5
Press these function keys to perform the functions described in the status bar on the display, directly above the keys.
5
SEL (Select) key
Press to select the displayed item.