There are currently no product reviews.
Easy to order the manual. Good quality and fast delivery.
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Document is original service document of sharp. I had a problem with the door contacts. Fuses where blown. With the manual in a few minuts is was clear what the problem was.
Manual was of great help.
With kind regards,
The scan is clear and well readable with very few weaker spots, usually on black background with white letters, but with enough zoom those spots can be read.
Printout is clear, the manual is complete and has all pages scanned.
I would give 5 stars, except that it is not in color, and the schematic and PCB pages are scanned on multiple pages. The document is locked (except printing) so the pages can not be extracted to compose them together for printing on the large plotter
It is worth the price tag.
let's say first that i do not need to have a credit for my opinion, i am a retired sparkie and i voluteerd to fix an electronic device for a local "Youthgroup",as no diagram was present i checked the "net" and gambled on this site and paying some fee via PayPall, i was gladly surprised that the manual arrived as was stated, GOOD SHOW, and best wishes, John
â How to enter the Test Mode
Reset while pressing both  key and  key.
â Special Display in the TUNER Mode
In the TUNER mode, there are abnormalities in the front end, etc. when the following displays are made. â¢ âTNE2P_NGâ: E2PROM is still in the initial value (unspecified value) due to F/E being shipped without going through the adjustment process or other reasons. â¢ âTNCON_NGâ: There is no communication with the F/E.
â How to release the Test Mode
The Test Mode can be released by resetting. The Test Mode is also released when there are: a momentary power down, Acc OFF, power OFF, and panel detachment.
â Initial condition of the Test Mode
The following are initial conditions of the Test Mode: â¢ The source in standby mode. â¢ The displays all lit up. â¢ Volume is -10dB (display will be 30). â¢ LOUD is OFF. â¢ CRSC is OFF regardless of whether the switching function is effective or not. â¢ SYSTEM Q is in NATURAL. â¢ SRS WOW are all OFF. â¢ BEEP will be a short one at all times. â¢ AUX is ON. â¢ SYSTEM Q on the MENU is OFF. â¢ GUIDE (NAVI) on the MENU is ATT. â¢ DISPLAY TYPE is TYPE A.
â Forced Switching of K3I
In TUNER mode, every time the  key is pressed, the following takes place: AUTO â Forced WIDE â Forced MIDDLE â Forced NARROW â AUTO. The initial condition is AUTO and there will be the following displays: â¢ AUTO â¢ Forced WIDE : FMA : FMW
â¢ Forced MIDDLE : FMM â¢ Forced NARROW : FMN Note : In synchronization with the above changes, numbers 1 through 3 are displayed but these are to be ignored.
â CD Receiver Test Mode Specifications
â¢ With key, there will be jumps to the following tracks: No. 9 â No. 15 â No. 10 â No. 11 â No. 12 â No. 13 â
â RDS Automatic Measurement
Conventionally, the visual inspection on the PS display has been conducted on the production line. From now on, a measure will be added to replace this. PS data is received and the PS contents is confirmed to be âRDS_TESTâ, the P-CON terminal is forced to go OFF. (â_â means blank.) This is a measure specific for the Test Mode. P-CON is recovered by switching the source or by power OFFâON.
No. 22 â No. 14 â No. 9 (Back to the beginning) However, when playing MP3/WMA disks with 8 files or less, tracks will be played in sequence as usually, beginning with Track1. â¢ When key is pressed, the previous track from the cur-
rent one will be played. â¢ While playing from CD sources, when  key is pressed intermittently, there will be a jump to No. 28. â¢ With models that have MP3 or MP3/WMA mechanism, the model name and version will be displayed in the lower column. â¢ When  key is pressed, there will be a jump to No. 15. When this takes place, the value is set to 29 (eXcelon model) or 26 (other models).