There are currently no product reviews.
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
good scans, all is clear. all pages in order. recommended
KDC-3022,322,5023/R,5024/V/Y/YV,507,5094RY TEST MODE
1. How to enter the test mode
â¢ While holding the preset 1 key and 3 keys, reset the unit. â¢ When the number of total tracks of an MP3 disc is nine or less, unit playback from a track 1. â¢ When the media to CD-DA, unit playback from track No.28 by key operation of preset 1 key.
2. How to exit from the test mode
â¢ Reset the unit, ACC OFF, power OFF, and come off the front panel assy for the unit.
7. Audio-related specifications
â¢ A short press of the Q key initiates the audio adjustment mode. â¢ Pressing the â½ key on the remote initiates the audio adjustment mode. â¢ Continuous holding of a remote control key is inhibited. â¢ Bass, Middle and Treble are adjusted in 3 steps of -8 / 0 / +8 with the Track Up/down keys (default is 0). â¢ Balance is adjusted in 3 steps of Left L15 / 0 / R15 Max with the Track Up/down keys (default is 0). â¢ Fader is adjusted in 3 steps of Rear15 / 0 / F15 Max with the Track Up/down keys (default is 0). â¢ HPF is adjusted in 2 steps of Through/170Hz (or 200Hz) with the Track Up/down keys (default is through). â¢ LPF is adjusted in 2 steps of Through/120Hz with the Track Up/down keys (default is through). â¢ Bass f, Bass Q, Bass EXT, Middle f, Middle Q and Treble f are not dealt with by the audio adjustment.
3. Initial status in the test mode
â¢ Sources â¢ Display â¢ Volume â¢ Loudness â¢ CRSC â¢ SYSTEM Q â¢ Aux â¢ Display color â¢ Beep sound : All OFF. : All segments were lit. : -10 dB (displayed as 30) : OFF : OFF regardless of the presence of switching function. : Flat. : ON : white (variable color display model only) : ON
4. Special display in Tuner mode
When any of the following messages is displayed in Tuner mode, the Front-end (F/E) may be bad condition. â¢ "TNE2P NG": The EEPROM is set to the default (unstable values) because the F/E was shipped without passing through the adjustment process, etc. â¢ "TNCON NG": Communication with the F/E to microprocessor is not possible.
8. Menu-related specifications
â¢ A short press of the PLAY/PAUSE key initiates the Menu mode. â¢ Pressing the DNPP key on the remote initiates the Menu mode. â¢ Continuous holding of a remote control key is inhibited. â¢ Contrast is adjusted press of the Track up/down key in 3 steps of 0 / 5 / 10 (default is 5).
5. Forced switching of K3I
Each press of the Preset 6 key in Tuner mode should switch K3I from AUTO Â¡ Forced Wide Â¡ Forced Middle Â¡ Forced Narrow Â¡ AUTO. The initial status is AUTO and the display shows these modes as follows. â¢ AUTO : FMA â¢ Forced Wide : FMW â¢ Forced Middle : FMM â¢ Forced Narrow : FMN
9. Backup current measurement
When the unit is reset while ACC is OFF (i.e. by turning Backup ON), the MUTE terminal goes OFF in 2 seconds in place of 15 second. (The CD mechanism is not activated at this time.)
6. Test mode specifications of the CD receiver
â¢ Forced ejection is inhibited in the reset start operation. When the unit is reset while a CD is loaded in it, the CD is not recognized by resetting. â¢ Each press of the Track Up key jumps to the following track numbers: No. 9 Â¡ No. 15 Â¡ No. 10 Â¡ No. 11 Â¡ No. 12 Â¡ No. 13 Â¡ No. 22 Â¡ No. 14 Â¡ No. 9 (The cycle restarts from here.) â¢ Each press of the Track Down key jumps to the previous track number to the track being played.