There are currently no product reviews.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
The manual was properly scanned and perfectly readable. The only small problem is that I couldn't use my dear Ctrl + F to find a word I needed.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Bought T4850 High End Tuner a few years ago, but i didn't know where all the buttons were used for. So i purchased the owners manual. Perfect! Just what i needed.
Auto Memory Entry
You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six frequencies can be stored this way. The 4 button moves the cursor to the left, and the Â¢ button to the right.
6 Press the FM or AM button to display the desired character.
Characters that can be displayed are as follows. Alphabet : A ~ Z Numerals and symbols : 0~9 @ " â ` % & * + - = , . / \ < > [ ] the name.
1 Select the band for auto memory entry. 2 Press the AME button for at least two seconds to start auto
memory entry. The numbers of the preset station buttons are shown in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.
7 Continue steps 5 and 6 until all the characters are chosen for
You can enter up to eight characters for each name.
8 Assigning Names
Press the MENU button. The name of the station is stored in memory, and the Station Name Preset mode ends. Also, if you make no input for 10 seconds, the name will be stored up to the point that you have entered, and the mode ends.
Function of the KDC-416S
Station Name Preset (SNPS)
You can assign names to radio stations with the Station Preset Memory. Up to 18 FM stations and 16 AM stations can be assigned names.
â¢ You can assign names to up to 18 FM stations and 16 AM stations. â¢ All the station names will be erased if you press the Reset button. â¢ If you want to change the name of a station, first display the name of the station (following steps 1 to 4 above), then change the letter(s) that you want by following steps 5 and 6.
1 Adjust the frequency to the station whose name you want to
2 Enter the menu mode
Press the MENU button for at least one second. "MENU" is displayed when the menu mode is entered. Function of the KDC-416S
3 Press the FM or AM button to select the display "NAME SET" . 4 Press either the 4 or Â¢ button for at least two seconds to
enter the station name preset mode. The cursor will blink in the position where letters are entered.
Switching Display for Tuner
You can change the display used when listening to the radio. Changing the Display: Each time you press the CLK button, the display changes as follows:
5 Press either the 4 or Â¢ button to move the cursor to the
â 14 â