The service manual when downloaded and printed out was clear and easy to read. The manual is complete with the schematic diagram and technical data. I occasionally require a manual and now having registered with this company I shall order from them in the future.
Text excerpt from page 35 (click to view)
Convenient recording methods
Program recording (CD =TAPE)
Desired CD tracks can be programed in the desired sequence and recorded onto a tape.
The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type ) and Metal (Type ) tapes.
Be sure to put the cassette deck in stop mode.
1 Make preparation for recording.
1 Select the CD input. 2 Ensure that the "RDM" indicators are not lit. 3 Perform steps 1 to 3 of the procedure in "Recording on TAPE". Â§ 4 Insert disc in the CD player.
Ã· If the "RDM" indicator is lit, turn it off by pressing the RANDOM key to cancel the random play mode.
2 Program the desired sequence of CD tracks.
Perform steps 1 and 2 of the procedure in "Listening to the desired sequence (program playback)". Âª
Ã· When the PGM key is pressed to cancel the edited contents, the entire editing contents will be erased. Âº Ã· Tracks programed beyond the available tape recording time will be interrupted in the middle.
3 Start recording.
Ã· Recording starts from the first track in the program and ends after having recorded the entire programed tracks. Ã· Recording stops automatically when the program playback of CD has completed. Ã· When either playback or recording stops, the other operation is stopped automatically.
To interrupt a recording
At the end of the recording
AUTO/MONO STOP 7
Stop is executed after an unrecorded portion of about 4 sec. has been produced.