I found my Clarion VRX8370R in the Camper I bought and I wasn't able for month to understand it.
The Owner Manual was perfect and just what I was searching for.
Thank you.
Leonardo
Very good copy of Manual, clear and easy to print off, arrived very promptly and reasonably priced.
Thanks, I will use you again.
Text excerpt from page 21 (click to view)
Timer operations
Timer playback of CD can be started at any time using an audio timer which is available in audio stores.
This unit
21
System control cord Audio cord
Preparation
÷ Connect the power cords of the associated components so that their power can be turned ON through the audio timer. (Also, be sure to read carefully the instruction manual of the timer.)
Amplifier or receiver
12 : 00
Audio timer To wall AC outlet
1 Turn the powers of the associated components 2 Preparation
Load a disc in the CD player.
Label side
ON.
÷ If the amplifier is not connected to the CD player through a system control cord, select the "CD" input with the input selector.
9
3 Set the amplifier volume.
1 Play the disc.
2 Adjust the amplifier volume. 3 Stop the disc.
4 Set the timer ON time.
Set the timer so that it supplies power at the specified time. ÷ With some audio timer models, the power is automatically turned OFF when the timer ON time is set. With such a model, skip step 5 below.
5 Turn OFF the power output from the audio
timer.
÷ Do not touch the ON/STANDBY (POWER/ and CD player. ) keys of the amplifier ÷ When the set time comes, the disc playback starts automatically.
Notes
1. Some amplifiers cannot be used with a timer. Before using a amplifier, check it. 2. When operating the unit other than CD player using an audio timer, be sure to remove the disc from the CD player.
