Speedy confirmation to my order , with elaborate instructions .
Item Email , received immediately as desired by me.
A Pleasant & Satisfying Transaction.
GRC 1 Confirm the Subwoofer adjustment display. (Select icon as required.)
To skip an adjustment item
RC/Main unit ÷ When an adjustment item is not required to be adjusted, press the MODE key to go to the next adjustment step. GRC ÷ Select only the icons of the adjustment items which require adjustment.
2 Adjust the level as required.
To increase
MULTI CONTROL
2 Adjust the level as required.
Sub W
-20dB
To decrease To increase
ENTER
sWch
+ 1)
dB
LEVEL
To decrease
÷ The level can be adjusted between -20 and +10 dB in steps of 1 dB.
2 Adjust the level as required.
To increase
MULTI CONTROL
2 Select the "Delay Time".
Delay Time
ENTER
÷ Find the optimum delay time for the listening room by referring to �How to calculate the delay time�. � ÷ The delay time in the PRO LOGIC mode can be adjusted between 15 and 30 ms. ÷ Select the closest value to the value obtained by �How to calculate the delay time�.
If the input level is too high, set it to -6 dB to avoid sound distortion.
÷ The input level can be set to -6 dB or 0 dB. ÷ This adjustment is not available with 6ch INPUT.
2 Adjust the level as required.
To increase
MULTI CONTROL
2 Select the "Input Level". 3 Set the input level.
dB
Input Level
LEVEL
ENTER
-6dB
I N P U T @ @@ -6
Each press changes the level.
To decrease
To quit the setup operation:
GRC
Main Menu
ENTER
÷ If no key on the main unit has been pressed for about 5 seconds, the display on the main unit disappears and it returns to the status before the setup mode was entered. ÷ The display on the GRC disappears if no key on the GRC has been pressed for about 10 seconds.
